Dr.-Ing. Markus Seilmeier
Dr. -Ing. Markus Seilmeier
Arbeitsgebiet:
Modellierung, Identifikation und Regelung elektrischer Antriebe
Dissertation:
Lagegeberlose Regelung der permanenterregten Synchronmaschine mit Zwei-Freiheitsgrade-Struktur
(Verlag Dr. Hut, ISBN: 978-3-8439-2424-5)
Auszeichnungen und Publikationen
Betreute Lehrveranstaltungen:
- SS – Übungen zu Linearantriebe
- SS – Seminar Elektrische Antriebstechnik BA
- SS – Seminar Elektrische Antriebstechnik MA
- SS – Praktikum Grundlagen der elektrischen Antriebstechnik
- SS – Praktikum Elektrische Antriebstechnik BA
- WS – Seminar Elektrische Antriebstechnik BA
- WS – Seminar Elektrische Antriebstechnik MA
- WS – Praktikum Leistungselektronik
- WS – Praktikum Elektrische Antriebstechnik MA
- WS – Laborvorführung im Rahmen der Vorlesung Elektrische Antriebstechnik II
Betreute studentische Arbeiten:
- Bachelorarbeiten
Programmierung, Test und Implementierung einer Matlab basierten Fernsteuerung eines Yokogawa Scopecorders zur Untersuchung der Betriebseigenschaften einer Unterbrechungsfreien StromversorgungWeiterentwicklung eines Verfahrens zur Kompensation nichtidealer Eigenschaften von Zweipunkt-Gleichspannungs-Zwischenkreis-UmrichternInbetriebnahme und Integration neuer Pulsumrichter in einen bestehenden Asynchronmaschinenprüfstand
- Studienarbeiten/ Projektarbeiten
Kompensation nichtidealer Eigenschaften von Antriebsumrichtern im Hinblick auf regelungstechnische AnwendungenProgrammierung und Implementierung einer MATLAB-Kommunikations-Schnittstelle für einen TransientenrekorderOptimale Drehmomentsteuerung bei Permanenterregten Synchronmaschinen mit magnetischer Anisotropie
- ForschungspraktikumInbetriebnahme eines Prüfstands zur Untersuchung von lagegeberlosen Regelverfahren für die Synchronreluktanzmaschine
- Diplomarbeiten/ MasterarbeitenImplementierung eines lagegeberlosen Regelverfahrens für Synchronreluktanzmaschinen auf einem dSpace-Echtzeitrechensystem
Robuste Einspeiseregelung auf Hardware-Plattformen mit beschränkter Rechenleistung
Aufbau eines Werkzeugs zur hybriden Antriebssystemsimulation von permanenterregten Synchronmaschinen
Automatische Bestimmung der Läuferlage einer permanent erregten Synchronmaschine
Optimierung von Aufbau, Steuerung und Regelung einer von einem Pulsumrichter gespeisten Asynchronmaschine
Untersuchung und Verbesserung der Dynamik einer feldorientierten
Regelung für die permanentmagneterregte Synchronmaschine mit
Oberflächenmagneten oder vergrabenen Magneten für Automotive-AnwendungenAnalyse und Erprobung eines Antriebs-Entwicklungssystems (Infineon
DaveDrive Application Kit) anhand eines KleinmotorenprüfstandsUntersuchung eines Verfahrens zur Kompensation von Oberwellenströmen
bei feldorientierter Regelung von permanenterregten Synchronmaschinen
Veröffentlichungen:
2015
- , , :
Sensorless Control of PMSM for the Whole Speed Range using Two-Degree-of-Freedom Current Control and HF Test Current Injection for Low-Speed Range
In: IEEE Transactions on Power Electronics, USA: Institute of Electrical and Electronics Engineers (IEEE), 2015, S. 4394-4403
DOI: 10.1109/TPEL.2014.2353215 - , , :
HF Test Current Injection-Based Self-Sensing Control of PMSM for Low- and Zero-Speed Range Using Two-Degree-of-Freedom Current Control
In: IEEE Transactions on Industry Applications, USA: Institute of Electrical and Electronics Engineers (IEEE), 2015, S. 2268-2278
DOI: 10.1109/TIA.2014.2369828 - , , :
HF Test Current Injection-Based Self-Sensing Control of PMSM for Low- and Zero-Speed Range Using Two-Degree-of-Freedom Current Control
In: IEEE Transactions on Industry Applications 51 (2015), S. 2268-2278
ISSN: 0093-9994
DOI: 10.1109/TIA.2014.2369828 - , :
Sensorless Control of PMSM for the Whole Speed Range Using Two-Degree-of-Freedom Current Control and HF Test Current Injection for Low-Speed Range
In: IEEE Transactions on Power Electronics 30 (2015), S. 4394-4403
ISSN: 0885-8993
DOI: 10.1109/TPEL.2014.2353215
2014
- , , :
HF Test Current Injection Based Self-Sensing Control of PMSM for Low and Zero Speed Range Using Two-Degree-of-Freedom Current Control.
IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2014) (Hiroshima, 17. Mai 2014 – 18. Mai 2014)
In: IEEE International Symposium on Sensorless Control for Electrical Drives (SLED 2014) 2014
DOI: 10.1109/SLED.2014.6844962 - , , :
HF Test Current Injection Based Self-Sensing Control of PMSM for Low and Zero Speed Range using Two-Degree-of-Freedom Current Control - , :
Impact of Iron Losses and Parameter errors and back-EMF based sensorless control of PMSM
Annual Conference of the IEEE Industrial Electronics Society (IECON 2014), 2014 (Dallas, TX)
In: IECON 2014 2014 - , :
Impact of Iron Losses and Parameter Errors on Back-EMF based Sensorless Control of PMSM - , :
Initial Start-up and Magnet Polarity Estimation Method for HF Test Current Injection Based Sensorless Control of PMSM
16th International Power Electronics and Motion Control Conference and Exposition (PEMC 2014, previous EPE-PEMC) (Antalya, Turkey, 21. September 2014 – 24. September 2014)
In: PEMC 2014 2014
DOI: 10.1109/EPEPEMC.2014.6980538 - , :
Initial start-up and magnet polarity estimation method for HF test current injection based sensorless control of PMSM - , :
Sensorless Control of PMSM for base speed range using Two-Degree-of-Freedom MTPA current control and HF test current injection for low speed range - , :
Sensorless Control of PMSM for the Whole Speed Range Using Two-Degree-of-Freedom Current Control and HF Test Current Injection for Low Speed Range
International Power Electronics Conference – ECCE Asia (IPEC 2014) (Hiroshima)
In: International Power Electronics Conference – ECCE Asia (IPEC 2014) 2014
DOI: 10.1109/TPEL.2014.2353215
2013
- , , :
Identification of high frequency resistances and inductances for sensorless control of PMSM
IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives & Power Electronics (SLED-PRECEDE 2013) (Munich, Germany, 17. Oktober 2013 – 19. Oktober 2013)
In: IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives & Power Electronics (SLED-PRECEDE 2013) 2013
DOI: 10.1109/SLED-PRECEDE.2013.6684515 - , , :
PMSM Model for Sensorless Control Considering Saturation Induced Secondary Saliencies
IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives & Power Electronics (SLED-PRECEDE 2013) (Munich, Germany, 17. Oktober 2013 – 19. Oktober 2013)
In: IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives & Power Electronics (SLED-PRECEDE 2013) 2013
DOI: 10.1109/SLED-PRECEDE.2013.6684519 - Ebersberger Sebastian, Seilmeier Markus, Piepenbreier Bernhard:
Flatness Based Sensorless Control of PMSM Using Test Current Signal Injection and Compensation for Differential Cross-Coupling Inductances at Standstill and Low Speed Range
IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives & Power Electronics (SLED-PRECEDE 2013) (Munich, Germany, 17. Oktober 2013 – 19. Oktober 2013)
In: IEEE International Symposium on Sensorless Control for Electrical Drives and Predictive Control of Electrical Drives & Power Electronics (SLED-PRECEDE 2013) 2013
DOI: 10.1109/SLED-PRECEDE.2013.6684510 - , , , :
Carrier signal based sensorless control of electrically excited synchronous machines at standstill and low speed using the rotor winding as a receiver
Power Electronics and Applications (EPE), 2013 15th European Conference (Lille, France, 2. September 2013 – 6. September 2013)
In: Power Electronics and Applications (EPE), 2013 15th European Conference 2013
DOI: 10.1109/EPE.2013.6631750 - , , :
Flatness Based Sensorless Control of PMSM Using Test Current Signal Injection and Compensation for Differential Cross-Coupling Inductances at Standstill and Low Speed Range - , , :
Identification of high frequency resistances and inductances for sensorless control of PMSM - , , :
PMSM Model for Sensorless Control Considering Saturation Induced Secondary Saliencies - , :
Identification of steady-state inductances of PMSM using polynomial representations of the flux surfaces - , :
Identification of steady-state inductances of PMSM using polynomial representations of the flux surfaces
IECON 2013 (Wien, 10. November 2013 – 14. November 2013)
In: 39th Annual Conference of the IEEE Industrial Electronics Society 2013
DOI: 10.1109/IECON.2013.6699591
2012
- , , , :
Identification of time-variant high frequency parameters for sensorless control of PMSM using an internal model principle based high frequency currrent control
ICEM 2012 (Marseille, France)
In: 20th International Conference on Electrical Machines 2012 - Böhm Andreas, Graus Johannes, Hahn Ingo, Seilmeier Markus:
Influence of Partly Closed Slots on the Differential Inductances
Third International Symposium on Sensorless Control for Electrical Drives (SLED) (Milwaukee, WI, USA, 21. September 2012 – 22. September 2012)
In: SLED 2012
DOI: 10.1109/SLED.2012.6422819 - , , , :
Identification of time-variant high frequency parameters for sensorless control of PMSM using an internal model principle based high frequency current control
2011
- Kellner Sven, Seilmeier Markus, Piepenbreier Bernhard:
Impact of Iron Losses on Parameter Indentification of Permanent Magnet Synchronous Machines
1st International Conference on Electric Drives Production (Nuremberg)
In: EDPC 2011 2011 - :
Modelling of Electrically Excited Synchronous Machine (EESM) considering nonlinear material characteristics and multiple saliencies - , :
Modeling of PMSM with Multiple Saliencies Using a Stator-Oriented Magnetic Circuit Approach
International Electric Machines and Drives Conference 2011 (IEMDC 2011) (Niagara Falls, Ontario, Canada, 15. Mai 2011 – 18. Mai 2011)
In: International Electric Machines and Drives Conference 2011 (IEMDC 2011) 2011
DOI: 10.1109/IEMDC.2011.5994796 - , , :
Modelling and Model Based Compensation of Non-Ideal Characteristics of Two-Level Voltage Source Inverters for Drive Control Application
1st International Conference on Electric Drives Production (Nuremberg, 27. September 2011 – 30. September 2011)
In: EDPC 2011 2011
DOI: 10.1109/EDPC.2011.6085542
2010
- Reill Josef, Kellner Sven, Ebersberger Sebastian, Seilmeier Markus, Piepenbreier Bernhard:
High Precision Identification Method for differential dq-Inductances of Permanent Magnet Synchronous Machines
PCIM Europe 2010 (Nürnberg)
In: International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management 2010 - Seilmeier Markus, Arenz Stefan , Piepenbreier Bernhard, Hahn Ingo:
Model Based Closed Loop Control Scheme for Compensation of Harmonic Currents in PM-Synchronous Machines
International Symposium on Power Electronics, Electrical Drives, Automation and Motion (Pisa, 14. Juni 2010 – 16. Juni 2010)
In: SPEEDAM 2010 2010
DOI: 10.1109/SPEEDAM.2010.5542398 - , , , , :
High Precision Identification Method for differential dq-lnductances of Permanent Magnet Synchronous Machines