Dr.-Ing. Andreas Lindner

2017

• Hahn I., Lindner A.:
  Practical Evaluation of a Passive Stator Cooling Concept without Thermal Stacking
  IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD 2017) (Universitiy of Nottingham, UK, 20. April 2017 – 21. April 2017)
  In: IEEE 2017
  DOI: 10.1109/WEMDCD.2017.7947736
• Hahn I., Lindner A.:
  Thermal Investigation and Enhancement of Advanced Cooling Techniques for a Large Air-Gap Flux-Switching Permanent Magnet Machine.
  IEEE IEMDC 2017 (IEEE International Electric Machines and Drives Conference (IEMDC 2017) (Miami, Florida, USA, 21. Mai 2017 – 24. Oktober 2017)
  In: IEEE 2017
  DOI: 10.1109/IEMDC.2017.8002115

2016

• Kurtovic H., Hahn I., Lindner A.:
  Investigation of parametrized curves for the pole shaping in an E-core Flux-Switching Machine with large air-gap
  8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016) (Glasgow, Scotland, UK, 19. April 2016 – 21. April 2016)
  In: PEMD 2016
  DOI: 10.1049/cp.2016.0318
• Lindner A., Hahn I.:
  Alternative ways of cooling an E-Core Flux-Switching Permanent Magnet Machine with Large Air-Gap
  Annual Conference of the IEEE Industrial Electronics Society (IECON 2016) (Florenz, Italien, 24. Oktober 2016 – 27. Oktober 2016)
  In: IEEE (Hrsg.): IECON 2016 2016
  DOI: 10.1109/IECON.2016.7793433
• Lindner A., Hahn I.:
  Investigation of a large air-gap E-core flux switching machine with arbitrary magnet shape and grain-oriented material
  International Conference on Electrical Machines (ICEM`2016) (Lausanne, Switzerland, 4. September 2016 – 7. September 2016)
  In: ICEM`2016 2016
  DOI: 10.1109/ICELMACH.2016.7732864
• Lindner A., Hahn I.:
  Measurement of rare earth magnets at high temperatures
  Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM`2016) (Anacapri, Capri Island, Italy, 22. Juni 2016 – 24. Juni 2016)
  In: SPEEDAM 2016
  DOI: 10.1109/SPEEDAM.2016.7525851

2015

• Lindner A., Hahn I.:
  Analysis and improvement of a toroidal wound permanent magnet flux-switching machine
  European Power Electronics Conference (EPE`15 ECCE Europe) (Genf, Switzerland)
  In: IEEE 2015
• Lindner A., Hahn I.:
  Design of a lightweight toroidal FSPM with large air-gap
  IEEE Workshop on Electrical Machines Design (Torino, Castello del Valentino, Italy, 26. März 2015 – 27. März 2015)
  In: IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD 2015) 2015
  DOI: 10.1109/WEMDCD.2015.7194489
• Lindner A., Hahn I.:
  Design of an E-core flux-switching permanent magnet machine with large air-gap
  IEEE International Electric Machines and Drives Conference (IEMDC 2015) (Coeur d´Alene, Idaho, USA, 10. Mai 2015 – 13. Mai 2015)
  In: IEEE (Hrsg.): IEEE IEMDC 2015 2015
  DOI: 10.1109/IEMDC.2015.7409274

2014

• Lindner A., Hahn I.:
  Simulation and optimization of a Flux-Switching machine with large air-gap using finite element method
  7th IET International Conference on Power Electronics, Machines and Drives (PEMD 2014) (Manchester, UK, 8. April 2014 – 10. April 2014)
  In: PEMD 2014 2014
• Lindner A., Hahn I.:
  Simulation of a permanent magnet flux-switching machine with reduced outer stator leakage flux
  2014 International Symposium on Power Elektronics, Electrical Drives, Automation and Motion (SPEEDAM 2014) (Ischia, Italy, 18. Juni 2014 – 20. Juni 2014)
  In: 2014 International Symposium on Power Elektronics, Electrical Drives, Automation and Motion (SPEEDAM 2014) 2014
  DOI: 10.1109/SPEEDAM.2014.6871929
• Lindner A., Hahn I.:
  Simulation of a toroidal wound flux-switching permanent magnet machine
  Annual Conference of the IEEE Industrial Electronics Society (IECON 2014), 2014 (Dallas, TX, USA)
  In: IECON 2014 2014

2013

• Lindner Andreas, Hahn Ingo, Böhm Andreas:
  A simple method for the parameter identification of the Jiles-Atherton model using only symmetrical hysteresis loops
  39th Annual Conference of the IEEE Industrial Electronics Society (Wien, Austria)
  In: IECON 2013 2013

2009

• Stadler Alexander, Albach Manfred, Lindner Andreas:
  A Practical Method to Measure Electrical AC Conductivity of MnZn Ferrites Using Conventional Toroids
  19th International Conference on Soft Magnetic Materials (SMM19) (Turin)
  In: IEEE Transactions on Magnetics 2009
• Stadler A., Albach M., Lindner A.:
  A practical method to measure electrical AC conductivity of MnZn ferrites using conventional toroids
  19th Soft Magnetic Materials Conference SMM19, September 2009 (Torino)